Molding on my car door... [Archive] - RonFez.net Messageboard

You must set the ad_network_ads.txt file to be writable (check file name as well).

View Full Version : Molding on my car door...

irishkb

01-25-2002, 01:31 PM

The other day i notice that molding going through the center of my car door is starting to fall off.. i was just wondering if anyone knows of a glue that i can use to make it stay put.... thanks in advance....

<IMGSRC="http://www.irishkb.50megs.com/images/irishkbspeed1.JPG-url">

The new Governor of the Moon

SweetPea

01-25-2002, 02:46 PM

Go to an Auto place and there is a special glue for molding! ;) Or some Gum might work

I'm a 16 yr old girl from L.I. :D
-+-Forever feeding the addiction known as RonFez.net!!-+-

Fat Guy

01-25-2002, 02:48 PM

You should take it completely off, and see what the factory used, clips, double sided tape, etc. and try to use the original stuff I would stay away from glues.

***********************
http://www.imagestation.com/picture/sraid28/p53e32376a6d0374e56f61b40f9b9ba0b/fe04e10c.gif
***********************

Gaia

01-25-2002, 02:52 PM

You could also use regular black RTV silicone on that gasket.

<IMG SRC="http://knocked.homestead.com/files/Davidd.jpg">

This message was edited by Gaia on 1-25-02 @ 6:56 PM

irishkb

01-25-2002, 02:53 PM

i pulled back the piece that is coming off and it looks like they used glue because i saw no tape or clips... my car is a jetta if that helps out any..

<IMG SRC="http://irishkb.50megs.com/images/irishkbspeed1.JPG">

The new Governor of the Moon